Chapter 3 Application Development Information EpsonNet SDK EpsonNet SDK is the API for the Epson network printer. Although the TM-C3400BK SDK is used for this product, it is necessary to substitute some values. The network setting is checked but setting can not be executed on this product. This is to use for developing the application to monitor the printer on the network of this product. The EpsonNet SDK operates under Win32. It can operate also under .NET, but not is not supported officially. be edited before installing it. See below for instructions on editing it. 3 To send the printer status with the EpsonNet SDK, it is necessary to set the Trap function.
129 Environmental Setting for EpsonNet SDK To make environmental settings for the EpsonNet SDK, “setting.ini” of the EpsonNet SDK needs to Item Set contents Value Default TCPIP Set to use the EpsonNet SDK for Ethernet model. Apply: 1 Not apply: 0 1 LOCAL Set to use the EpsonNet SDK for USB model. Apply: 1 Not apply: 0 1 SHARE Set to use the EpsonNet SDK on shared printers. Apply: 1 Not apply: 0 0 TRAP Set to use the SNMP TRAP. Apply: 1 Not apply: 0 0 EXECTYPE Fixed value TERM - SHREAGT Set to use the server communication module for MS shared printing. Apply: 1 Not apply: 0 0 EPSONNETSDK Fixed value 0 - INSTALL Fixed value 0 -