Setting Procedure When the EpsonNet SDK has already been installed, uninstall it first. Follow the steps below to make the setting for the EpsonNet SDK, and then install it again. 1 Edit “setting.ini” in the Install Disk of the EpsonNet SDK. 2 Install the EpsonNet SDK. INKSIDMSTATUS_02 structure If data is acquired with INKSIDMSTATUS_02_structure, substitute the following values. 130 Field Name Meaning/Value 17 InkColorNumber Number of printer colors. 0x04: 3 colors to 1 color 22 CartridgeInk Color Type: 0x02: Cyan to Black 0x04: Magenta to Black 0x08: Yellow to Black InkRest returns the same value for each Color Type.
Therefore, the level of ink remaining can be checked at any one of the above locations. 44 WarningCode2 Printer warning code. 0x10: Ink low (cyan to Black) 0x11: Ink low (magenta to Black) 0x12: Ink low (yellow to Black)