Chapter 4 Maintenance Cleaning the Autocutter Adhesive from labels may stick to the fixed blade of the autocutter, which may prevent the autocutter from cutting paper cleanly. If this happens, follow the steps below to clean the autocutter. Do not touch the fixed blade of the autocutter directly. Doing so may cause injury. CAUTION 1 Turn off the power. 2 Once the power lamp goes off, unplug the power plug from the outlet. 3 Open the roll paper cover to remove the paper. 4 Remove the adhesive on the autocutter blade with an implement such as a cotton swab. If necessary, moisten the cotton swab with alcohol. 4 Autocutter blade 125