Chapter 3 Utility Settings-Layout (Page Layout) You can set the page layout. 3 ZPL language has the LL (Label Length) and PW (Paper Width) commands. When these commands are sent, the settings are retained in the printer until it is turned off. The settings retained inside are maintained until the next page layout command is sent and used for print- ing. Therefore, there is no need to send the page layout command each time. When the JU (Configuration Update) command is sent, the settings in the printer are saved and maintained even after the printer is turned off. The values saved and retained inside can be viewed in this screen.
If the settings are configured from this screen, the values set inside are maintained even after the printer is turned off, as is the case when the JU command is sent. If the printer is turned on after that and printing is started in the default status without any page layout command sent, the values specified in this screen are used for printing. 81 Item Description Label Length Sets the label length. Paper Width Sets the paper width. Label Gap Sets the label gap. Set Sends settings to the TM-C3400Z. The "Page layout has been saved." window appears when the setting has been successfully completed. The display automatically returns to the setting window.