Continuous Paper (Black Marks) and Fanfold Paper When Borderless Printing Enabled Margins at top, bottom, right, and left: 0 mm (typical value) Paper width center Paper feed direction Auto cut position Perforated line Auto cut position Auto cut position Perforated line Print area Print area width Black mark position (back side) 65 Paper width 15.0 mm or more (When not auto cutting, 8.0 mm or more) Issuing interval (Ph) Perforated line interval (Pm) c IMPORTANT Set the perforated line interval so that it becomes an integral multiple of the issuing interval. Q Note The maximum value of the print area width is 104 mm.