• Die-cut labels (gaps) and die-cut label with transparent backing paper Set a margin of 107.5 to 120 mm between the end edge of the paper and the end edge of the final ticket or label printed. Do not set the label so that it is located less than 107.5 mm from the end edge of the paper. This area must only consist of backing paper. Paper feed End edge of last label Roll paper core 107.5 to 120 mm Fanfold Paper Handling Compatible paper formats are as follows. • Continuous paper (black marks) • Die-cut labels (black marks) Paper Handling Method Set a margin of 150 mm or more between the end edge of the paper and the end edge of the final ticket or label printed.
Do not set the label so that it is located less than 150 mm from the end edge of the paper. This area must only consist of backing paper. Affix two black marks behind the final ticket or label printed. Continuous paper (black marks) Die-cut labels (black marks) Paper feed direction Max. 11 mm End edge of last label 150 mm or more 89 Q NOTE A No Paper Error occurs after printing of the last ticket or label is com- pleted and the printer stops. Q NOTE If new print data is sent to this printer after print processing (including auto cut) of the final ticket or label has completed normally, a Media Size Error will occur, and the printer will stop with the print data retained.
Paper feed direction Max. 11 mm 5 ±0.5 mm 150 mm or more Max. 11 mm 5 ±0.5 mm 150 mm or more