Chapter 1 Product Overview Status/Error Indications The printer status is displayed with combination of lighting and flashing of LEDs. When an error occurs, you can find out the cause and the remedy from the LED indication for the error. 1 21 / : Lights / : Flashes — : No change LED Status Remedy (Power) ERROR INK PAPER OUT — — — Power on — — — — Charging ink Closing roll paper cover Saving or printing data — (Hi-Speed) — — — Powering off — — — Maintenance requirement The printer needs repair. — Fatal error 1. Turn the power off. 2. Open the roll paper cover and remove the jammed paper if any. (See "Removing Jammed Paper" on page 65.) 3. Turn the power on.
If the same error persists, the printer needs repair. — — — Ink cartridge cover open Close the ink cartridge cover. Roll paper cover open Close the roll paper cover. — — — Ink is low Waste ink cartridge is nearly full The time to replace the ink cartridge is close. Prepare a new ink cartridge. — — Time to replace ink cartridge Waste ink cartridge is full Replace the ink cartridge with a new one. (See "Replacing the Ink Cartridge" on page 61.) Ink cartridge is not installed Ink cartridge is not installed correctly Install the ink cartridge correctly. (See "Replacing the Ink Cartridge" on page 61.) — — — Roll paper is nearly out The time to replace the roll paper is close.
Prepare new roll paper. — — Roll paper out Replace the roll paper. (See "Replacing the Roll Paper" on page 63.)