Chapter 4 Handling Troubleshooting Lighting and Flashing Error LED Recover from the error as follows when the Error LED is on or flashing. (For LED lighting/flashing patterns, see "Status/Error Indications" on page 17 .) • Make sure that the roll paper cover is closed. Close the cover if it is open. • When the Replace Ink LED is on, replace the ink cartridge with a new one. • When the Check Paper LED is on, check whether the roll paper is out. If it is out, replace it with a new one. • When the Paper Jam LED is on, check for a paper jam. If paper is jammed, remove the jammed paper referring to "Removing Jammed Paper" on page 60 , and install the roll paper correctly.
• Turn off the printer and then turn it back on. If the Error LED is still flashing, call your supervi- sor or a service person. 4 101