Rear Panel USB interface connector Lane setting button Power connector Self-test button Ethernet interface connector Power connector: Connect a DC cable for the accessory AC adapter. Self-test button: Press the button to perform a self-test. You can check the printer status with the following items the self-test prints out. Printer configuration IP address Firmware version Serial number Nozzle check pattern USB interface connector: Connect a USB cable when USB interface is used. Lane setting button: The printer executes the lane setting function after this button is held down for 5 seconds or longer continuously. Ethernet interface connector: Connect a LAN cable.
For details how to connect the interface and power supply connector, see "Connecting the USB/ Ethernet Cable" on page 37 and "Connecting the AC Adapter" on page 39 . 14