Chapter 2 Setup Connecting the AC Adapter Always use the included AC adapter. WARNING Using a nonstandard power supply can result in electric shock or fire. Should a fault ever occur in the AC adapter, immediately turn off the power to the printer and remove the AC cable from the outlet. Unplug the power cable of the AC adapter from the outlet before you plug/unplug the AC adapter into the printer. Make sure the wall socket power supply satisfies the rated voltage requirements of the AC adapter. Never insert the AC cable into a socket that does not meet the rated voltage requirements of the AC adapter. Doing so may result in damage to both the AC adapter and the printer.
Follow the steps below to connect the AC adapter. 1 Plug the accessory AC cable into the accessory AC adapter. 2 2 Plug the DC cable of the AC adapter into the printer’s power connector (stamped “42V”). 3 Plug the AC cable into the outlet. 39