Pause Command During Printing TM-C7500 Paper Feeding Timing Chart Logic can be reversed using commands 1 Switch using command. See "Pause" on page 13 . 2 After “Pause” signal is input, it enters a pause status after finishing printing of the current page. 3 Pause cancelled. 4 Create an interval (more than one second) when toggle the pause status. 5 Enters into a pause status when the page currently being printed is ended without being completed. 6 If paper is being fed in the normal feeding direction. / If paper feeding is done by the panel. 7 Switch using command. See "Print end" on page 8 . 8 If continuous printing ended.
(Including stops due to head cleaning or nozzle checks.) 9 If paper is being fed in the reverse feeding direction. 22 Printing (forward feed) Back feed A B C D A A B C D I/F Signal Pause signal Level *1 Pulse *1 Printer error signal Print end signal Level *7 Pulse *7 Back feed signal *2 *3 *4 *2 *3 *4 *5 *6 *8 *9