English Follow these steps to install an ink cartridge for the first time or to replace a used ink cartridge. 1. Make sure the printer power is on. If it is not on, plug in the power supply cable and press the power switch on the front bottom-right of the printer. 2. Make sure the INK LED is lit or flashing. When using both the black ink and colored ink, check which of the ink cartridge INK LEDs is lit or flashing. 3. Hold the tab and open the ink cartridge cover. 4. Hold the knob at the top of the used ink cartridge and lift the cartridge out of the printer. (TM-J9100) 5. Take a new ink cartridge out of its packaging, and remove the yellow CAUTION:
Do not remove any tape on which the EPSON logo is printed. TM-J9000/J9100 User’s Manual 11 tape.