Appendix Restrictions on Printing Surface Preprinting is prohibited within the detection area of the label removal detector. 40 mm wide paper 58 or 80 mm wide paper Preprinting is prohibited Preprinting is prohibited Paper feed direction Paper feed direction 15.25 mm 33.15 mm 15.00 mm 15.00 mm Front (printing side) Front (printing side) • Preprinted thermal paper can cause printing defects or decrease in print density due to sticking of the thermal head to the recording surface. Therefore, it is preferable not to use preprinted thermal paper.
• When using preprinted thermal paper, perform preprinting according to the conditions recommended by the paper manufacturer (ink type, printing conditions, etc.), and confirm in advance that there are no printing defects, reduced printing density, or other problems with the thermal paper. 126