Chapter 2 Setup Connecting to the Power Source Connect the AC adapter to supply power to the printer. • Be sure to use the specified AC adapter PS-190 (Model: M368A) only. Using another AC adapter may result in causing fire or shock. • Be sure to use the AC cable that came with the printer. • Never insert the AC cable plug into a socket that does not meet the input voltage of the AC adapter. Doing so may result in damage to the printer. • Should a fault ever occur, immediately turn off the power to the printer and unplug the AC cable from the socket. WARNING Connecting the AC Adapter 1 Make sure the printer is turned off. 2 Connect the AC cable to the AC adapter.
3 Lay the printer on its side. 4 Remove the rear cover. 45