❏ POWER LED ❏ ERROR LED ❏ BATT. LED ❏ FEED button 2.1.2.1 LED POWER ERROR BATT. 2.1.2.2 Control Panel Buttons The control panel has a FEED button that you may have to use, although most paper handling functions will be handled by your software. FEED Use this button to feed roll paper or to start a roll paper self test, or start printing status sheet. ( See “3.5.1 Self test mode” on page 3-3.) 2-2 Setup Rev. C POWER LED Meaning On Power is on. Off Power is off. Flashing The printer is in power-off operation or is in an area where wireless communication is not possible.
Printer Condition ERROR LED Meaning Power On On Printer is offline (paper out, power-on initialization, roll paper cover open, power-off operation, or the remaining battery charge is not enough for printer operation when the battery is used to supply the power.) Off Printer is online. Flashing It indicates an error. See “3.1 LED Blinking Pattern” (page 3-1) for troubleshooting Power Off, battery installed, and AC adapter connected On Indicates that an abnormality occurred during battery charging. The battery must be replaced with a new one. Off No problem. Printer Condition BATT. LED Meaning Power On without AC adapter On Remaining battery charge is not enough. It must be charged.
Off Remaining battery charge is adequate. Flashing Remaining battery charge is below half. Power Off and battery installed On The battery is being charged. Off The battery is fully charged.