TM-P60 Technical Reference Guide Appendix A The Difference Between TM-P60 and TM-T88II/III TM-P60 is able to print with 42 print columns (when paper width is 58mm and Font B is printed [default]). The number of print columns is the same as that of the TM-T88II/III (when paper width is 80mm and Font A is printed [default].) Therefore, the TM-P60 is able to print with same layout as TM-T88II/III. A.1 Can TM-P60 print with TM-T88II/III printer driver? Unfortunately, the answer is No. If you drive the TM-P60 with a TM-T88II/III printer driver (OPOS, or Advanced Printer Driver), the printer doesn't work correctly. Control the printer with ESC/POS commands directly.
A.2 Can TM-P60 send back status to host PC the same as TM-T88II/III? The answer is yes; however, the kind of status is little different between the TM-P60 and the TM-T88II/III. The differences are shown in the following table. Rev. C The Difference Between TM-P60 and TM-T88II/III A-1 Status name TM-T88II/III TM-P60 Comment Drawer status Supported. Not supported TM-P60 doesn’t have drawer kick out connector. Roll paper near end Supported. Not supported TM-P60 doesn’t have near end detector. Roll paper cover open error Supported. Not supported TM-P60 doesn’t have the error. Battery remaining amount Not supported. Supported TM-T88II/III doesn’t have battery.