Appendix Settings in SimpleAP mode (Factory default settings) Printing communication protocol LP, LPR: Transfers printing data TCP Socket Port: Transfers printing data and printer status via bidirectional direct socket communication. LP, LPR Max. simultaneous connections: 2 Number of connections for which printing is available: 1 (Other users need to wait until printing is completed.) Time out: 1 min. (changeable) Job cancel: Not available Banner printing: Not available Socket communication Port type TCP communication port for direct printing Port number 9100 Port communication direction bidirectional Max.
simultaneous connections 2 Number of connections for which printing is available 1 (Other users need to wait until printing is completed.) Time out: 1 min. (changeable) Notes on Wireless LAN connection Because not all the combinations of the printer and wireless LAN devices have been checked for operation, the operation of the printer in combination with all the wireless LAN devices is not guaranteed. Especially in the ad-hoc mode, the printer may not operate normally, depending on the combination of the device to connect with. Be sure to carry out evaluation of the operation before use.
105 Parameter Setting value SSID EPSON Printer _ Passphrase 12345678 IP Address 192.168.192.168 Subnet mask 255.255.255.0