Control Panel Power LED Error LED Charge LED Battery LED Power button Feed button Buttons Power Button Press this button to turn the printer on. Press this button for 2 seconds or more to turn the printer off. After the power button is pressed, it takes the following time before the printer is initialized. Establishing a wireless communication takes longer than the following. IEEE802.11a/b/g/n: Approx. 10 sec. after the Power LED comes on. Bluetooth : Approx. 2 sec. after the Power LED comes on. The printer does not operate and the LEDs go out when the battery is not installed in the printer even if the printer is connected to the AC adapter.
To turn the printer on immediately after turning the printer off, press the Power button after the LEDs go off. Feed button When Paper Type Setting is set to Receipt paper (without black mark), pressing this button once feeds paper by one line. Holding this button down feeds paper continuously. When Paper Type Setting is set to Receipt paper (with black mark), pressing this button feeds paper to the print starting position on the next black mark. Enabling/disabling of the Feed button can be selected by a command. If the command is set to disable the button, it does not function. 18