EPSON — Settings

Chapter 3 Advanced Usage Configuration menu You can configure the settings as shown in the table below. 3 71 Menu Settings Wireless Wireless Settings (Communication Standard, Network Mode, SSID, Chan- nel, Encryption Type) WPA Pre-Shared Key, Default WEP Key, WEP Key 1/2/3/4, Authentication Algorithm Power Save Roaming AP Density Note: Characters you can use for the User ID/Password when using WPA-Enter- prise are as follows: - Character code: ASCII character (20H to 7EH) - Maximum number of characters:

128 Security SSL/TLS Server Certificate, Encryption Strength, Automatic Redirect HTTP to HTTPS Authentication Certificate List Self-Signed Certificate (Status, Subject) CA-Signed Certificate 1~3 (Status, Subject) CA Certificate 1~10 (Status, Subject) Certificate Import Certificate Import (File Type, File Name, Password) Note: Characters you can use for the Password section are as follows: - Character code: ASCII character (20H to 7EH) - Maximum number of characters:

64 TCP/IP IPv4 Address IP Address Settings (Acquiring the IP Address, IP Address, Subnet Mask, Default Gateway) Set Using Automatic Private IP Addressing (APIPA) DNS/DDNS DNS Server Addresses (IPv4) Settings (Acquire DNS Server Address Auto- matically, DNS Server Addresses) Host Name and Domain Name Setting (Acquire Host Name and Domain Name Automatically, Host Name, Domain Name, Register the Network Interface’s Address to DNS Server) SNMP Community (Read/Write, Wellknown Community Name) IP Trap (Trap1/2, Address, Community) Bonjour Bonjour (Disable/Enable) Bonjour Name, Bonjour Printer Name, Location Time Setting Use Time Server Time Server Address, Update Interval Timeout Print (LPR, RAW (Port9100)) ePOS-Print Version, ePOS-Print (Disable/Enable), Device ID