Test Printing Self-test printing can be used to check product settings. Self-test printing on cut sheets can be used to check for missing dots and other printing irregularities. For printing procedure, refer to “Self-test Mode” on page 50 . Firmware version 1.02 ESC/POS Buffer Capacity 4K bytes (fixed) Handshaking operation (busy condition) Receive buffer full (fixed) Automatic line feed (CR command function) Disabled Resident character Alphanumeric Power on status Disabled Receipt cover open Auto recoverable error Remote wakeup Enabled Nozzle check pattern Maintenance information Thermal head : 0.000 km Autocutter : 1 cut Inkjet head(nozzle1) : 234 shots Inkjet head(nozzle1) :
130 shots MICR head : 92 sheets Memory switches 42