Product Installation Packing materials are affixed for protection against shock during transportation. Remove the packing materials shown below before installing the product. The packing materials and packaging box are required for future transportation. Keep them in a safe place. Installation Provide sufficient space in a location appropriate for installation.
Location Appropriate for Installation • On an area larger than the bottom surface of the product ( U “Overall Dimensions” on page 109 ) • In a level and stable location • In a location free of vibration and impacts • In a location where a dedicated power outlet is available • In a location with sufficient space around the product to allow for replacement of consumable products, and daily cleaning. • In a location meeting the guaranteed environmental conditions ( U “Environmental Specifications” on page 107 ) • When moving the product, lift it up by grasping at the depressions on either side. • Make sure that cords or other objects are not being pinched by the product.
• To avoid deterioration of the MICR recognition rate, do not install the product near a magnetic field. In particular, check the MICR reader recognition rate when the product is installed near a display device. 36 Removing the Packing Materials