Chapter 3 Application Development Information When the printer finishes printing the printer status, the following message is printed and the Paper LED flashes. (The printer is now in the self-test wait mode.): “Select Modes by pressing Feed button. Continue SELF-TEST: Less than 1 second Mode Selection: 1 second or more” 3 Press the Feed button to start the test print (less than 1 second). The printer starts test printing. (A rolling pattern is printed using only the resident character set.) If you select “Mode Selection,” the printer goes to "NV Graphics Information Print Mode" (page 71) , "Receipt Enhancement Information Print Mode" (page 73) , or "Memory Switch Setting Mode" (page 74) .
After the test printing has finished, the printer prints the following message, and then the printer is initialized and returned to the normal mode. “*** completed***” 3 69