2. PRINTER SETUP ENGLISH VERSION EO1-33094 2.4 Connecting the Cables to Your Printer 2.4 Connecting the Cables to Your Printer The following paragraphs outline how to connect the cables from the printer to your host computer, and will also show how to make cable connections to other devices. Depending on the application software you use to print labels, there are 5 ways to connect the printer to your host computer. These are: An Ethernet connection using the printer’s standard LAN connector. A USB cable connection between the printer’s standard USB connector and your host computer’s USB port.
(Conforming to USB 2.0) A serial cable connection between the printer’s optional RS- 232 serial connector and one of your host computer’s COM ports. A parallel cable connection between the printer’s optional parallel connector and your host computer’s parallel port (LPT). Wireless LAN using an optional Wireless LAN board. Power Switch AC Power Inlet E2-12 Reserved for Serial or WLAN Interface Reserved for For GS/TS/HS16 models, WLAN Parallel Interface Interface USB Interface Reserved for RTC & USB Host interface Reserved for Expansion I/O Interface Reserved for Serial or WLAN Interface For GS/TS/HS16 models, WLAN Interface USB Interface