5.2 EMCrequirement 5.3High temperature and low temperature test (including storage and working test) 6 Electrical characteristics 11 Serial number Test items Test standard Requirement Remarks EMI Radiation disturbance emission EN55022 / CLASS A Conducted disturbance emission EN55022 / CLASS A Storage test Temperature - 40℃, time 12h Appearance requirements:
The product surface shall be free of obvious dents, scratches, cracks and deformation, the surface coating shall be free of bubbles, cracks and falling off, and the metal shall be free of corrosion and other mechanical damage; Appearance, convenient operation, flexible and reliable.Parts are fastened without looseness;The text symbols and function display describing the function are clear and correct. Full load energization under mains and battery conditions shall meet the following requirements: Output voltage: 220V ± 5%; Output frequency: 50Hz ± 0.5% Output waveform distortion:
less than 3% Temperature 70℃, time 12h Temperature℃, humidity 95%, time 48H Operation test Temperature - 10℃, time 2H Temperature 40℃, time 2H Temperature 40℃, humidity 95%, time 2H Serial number Capacity(KVA) 3 6 9 12 15 Company Remarks 1 Input properties 1.1 Rated AC input voltage 220 Vac 1.2 AC input voltage range 165-260 Vac 1.3 AC input frequency range 45~55 Hz 1.4 Rated DC input voltage 48 Vdc 1.5 Rated current 80 A 1.6 Normal operating input voltage range 43~58 V 1.7 Maximum impulse current input at startup Less than 150% of rated current 2 Output characteristic Serial number Project Technical requirement Company Remarks 2.1 Hand over flow transport out Rated output power 3 6 9 12 15 KVA Battery inverter Output effective power 2.4 4.8 7.2 9.6 12 KW Rated output voltage 220 Vac Battery inverter, bypass mode is the same as that