omron — Using Sentech STC-M Cameras with AutoVISION and VISIONSCAPE – Supplemental User Guide (EN)

e. Click on the Execute button. f. A DOS shell will open and driver install will be initiated g. Complete all prompts h. Exit the GigE Camera Control Tool application when all cameras are complete. 6) Delete dm.config file from the c:\omron\vscape\DM or c:\microscan\vscape\DM folder. 7) Start AutoVISION or Visionscape FrontRunner 8) Open the AVP Backplane debug window. You should see the cameras. In this case with only one camera connected, it is channel 0 (camera 1). 9) The dm.config file will show the camera as GigE with INT=JAI Virtual Driver and non-zero width, height and serial number. Using Sentech STC-M Cameras with AutoVISION and Visionscape Page 18 of 32