2 How to Modify the dm.config File to Change Camera and System Assignments System Components 098e5ed439d2" /> 839558dc0f6c" /> type="GigE_Camera" MACAddress="00-06-BE-00-09-4A"> TL=>GevTL , INT=>FD::MAC->00-1B-21-0A-0C- 72::National Instruments GigE Vision Adapter - Packet Scheduler Miniport , DEV=>::MAC->00-06-BE-00-09-4A::Baumer Optronic::VISIONSCAPE CMG20 192.168.254.3 00-06-BE-00-09-4A Microscan 1624 1236 VISIONSCAPE CMG20 type="GigE_Camera" MACAddress="00-06-BE-00-09-4B"> TL=>GevTL , INT=>FD::MAC->00-1B-21-0A-0C- 72::National Instruments GigE Vision Adapter - Packet Scheduler Miniport , DEV=>::MAC->00-06-BE-00-09-4B::Baumer Optronic::VISIONSCAPE CMG20 192.168.254.2 00-06-BE-00-09-4B Microscan 1624 1236 VISIONSCAPE CMG20 The GigEVision1 system now contains two assignments and there is a second camera resource at the bottom of the file.
The debug window now shows two cameras on GigEVision1: 11:19:11 QuerySWRights: GigE license rights detected, features: Visionscape GigE (x8): YES / IntelliFind: YES / Third Party GigE Cameras: 0 allowed 11:19:13 CreateSystemsFromConfigFile: found 2 devices in dm.config file 11:19:13 Creating GigE System 1: GigEVision1 Visionscape GigE Camera Guide 2-39