10. A/C and Safety System 10-99 A/C system 10.1.10.2 Removal and refitting of compressor assembly (EV) Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative termin al (refer to 3.1.6.1 Maintenance and inspection of battery ) 3. Recover the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 4. Remove the engine compartment front middle trim panel assembly (refer to 8.6.6.11 Removal and refitting of engine compartment front middle trim panel assembly) 5. Remove the compressor assembly. a. Remove the compressor harness assembly connectors. c. Unscrew 2 fixing nuts of the compressor pipeline. Tightening torque of nut: 8±1Nm.
CAUTION: – Sealing pipeline connectors. VOYAH FREE