10. A/C and Safety System 10-101 A/C system 10.1.10.3 Removal and refitting of compressor assembly (REV) Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3. Lift the vehicle and remove the high voltage (refer to 3.1.6.2 High voltage removal) 4. Recover the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 5. Removing the engine compartment front middle trim panel assembly (refer to 8.6.6.21 Removal and refitting of engine compartment front middle trim panel assembly (REV) 6.
Remove the low temperature radiator outlet pipe (refer to 4.4.8.15 Removal and refitting of low temperature radiator outlet pipe) 7. Remove the compressor assembly. a. Remove the compressor harness assembly connectors. VOYAH FREE