10-106 A/C system 10. A/C and Safety System Refitting procedure The refitting procedure is performed in reverse order. CAUTION: – Replace the O-ring with a new one, and apply A/C compressor lubricating oil to the O-ring. – Vacuum the A/C system after the refitting is completed (refer to 10.1.12.14 A/C system vacuuming – Add the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 10.1.10.7 Removal and refitting of compressor exhaust pipe assembly (REV) Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3.
Recover the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 4. Remove the front middle trim panel assembly of the engine compartment (refer to 8.6.6.21 Removal and refitting of engine compartment front middle trim panel assembly (REV) 5. Remove the low temperature radiator outlet pipe (refer to 4.4.8.15 Removal and refitting of low temperature radiator outlet pipe) 6. Remove the front bumper (refer to 8.6.3.3 Removal and refitting of front bumper assembly ) 7. Remove the compressor exhaust pipe assembly. VOYAH FREE