10. A/C and Safety System 10-113 A/C system 10.1.10.10 Removal and refitting of front evaporator outlet pipe assembly (REV) Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative termin al (refer to 3.1.6.1 Maintenance and inspection of battery ) 3. Recover the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 4. Removing the left and right front trim panel assemblies of the engine compartment (refer to 8.6.6.21 Removal and refitting of engine compartment left front trim panel assembly (REV) 5.
Remove the left and right rear trim panel assemblies of the engine compartment (refer to 8.6.6.12 Removal and refitting of engine compartment rear trim panel assembly ) 6. Remove the wiper cover plate. See 8.6.7.9 Removal and refitting of wiper cover plate 7. Remove the front compartment high pressure box assembly (refer to 4.5.8.2 Removal and refitting of engine compartment HV box assembly ) 8. Remove the low temperature radiator outlet pipe (refer to 4.4.8.15 Removal and refitting of low temperature radiator outlet pipe) 9. Remove the front evaporator outlet pipe assembly. a. Unscrew the fixing nut A of the front evaporator outlet pipe assembly. Tightening torque of nut: 8±1Nm. CAUTION:
– Sealing pipeline connectors. VOYAH FREE