10-376 A/C and safety system 10. A/C and Safety System 10.2.6.6 Removal and refitting of rear single buckle components Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal. Refer to 3.1.6.1 Maintenance and inspection battery 3. Remove the rear seat cushion assembly (refer to 8.1.6.1 Removal and refitting of rear seat cushion assembly ) 4. Remove the rear left back assembly (refer to 8.1.6.4 Removal and refitting of rear left back assembly ) 5. Remove the rear single buckle components. a. Disconnect the rear single buckle component connectors. b. Unscrew the fixing bolts of the rear single buckle components.
Tightening torque of bolt: 50±8Nm. c. Remove the rear single buckle components ① . Refitting procedure The refitting procedure is performed in reverse order. VOYAH FREE