Care & Maintenance Enabling/disabling Wi-Fi Warning: Make sure the purifier is turned off and the power adapter is unplugged before replacing the filter. To enable or disable Wi-Fi, simultaneously press and hold the mode switch button and the light adjustment button for 7 seconds. The Wi-Fi indicator is on when the Wi-Fi is enabled, and is off when the Wi-Fi is disabled. Replacing the filter Remove the old filter and install a new one correctly as illustrated. Connecting with the Mi Home/Xiaomi Home app This product works with the Mi Home/Xiaomi Home app*. Control your device with the Mi Home/Xiaomi Home app. Scan the QR code to download and install the app.
You will be directed to the connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi Home" in the app store to download and install it. Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow the instructions to add your device. Resetting the filter *The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. While the purifier is on standby, press and hold the power button for 7 seconds. When the filter is successfully reset, the purifier will make a notification sound and the air quality indicator will remain green for 1 second. Note:
The version of the app might have been updated, please follow the instructions based on the current app version. Note: It is recommended to replace the filter every 6 to 12 months. Please purchase genuine and compatible filters from official channels. 7