User's Guide Loading Paper 9. Check the paper size and paper type settings displayed on the control panel. To use the settings, select Confirm using the u or d button, press the OK button, and then go to step 11. To change the settings, select Change using the u or d button, press the OK button, and then go to the next step. Note: ❏ When the Paper Setting Alert feature is enabled, a message is displayed if the registered paper size and paper type settings differ from the print settings. ❏ The paper setting screen is not displayed if you have disabled Paper Configuration in the following menus. Go to step 11. In this situation, you cannot print from an iPhone or iPad using AirPrint.
Settings > Printer Setup > Paper Source Setting > Paper Configuration 10. On the paper size setting screen, select the paper size using the l or r button, and then press the OK button. On the paper type setting screen, select the paper type in the same way, and then press the OK button. Check the settings, and then press the OK button. Note: You can also display the paper size and paper type settings screen by selecting the following menus. Settings > Printer Setup > Paper Source Setting > Paper Setup 11. Slide out the output tray. Related Information & “Paper Handling Precautions” on page 36 & “Available Paper and Capacities” on page 37 43