Installation Instructions How to Use Step 5: Install the front grille Connect to a power outlet 11 1. Align the front grille alignment mark with the rear grille lef alignment mark, and make sure the front grille is properly embedded into the rear grille. Plug the power cord into a power outlet. Once you hear a beep, the fan is connected successfully. 13 2. Turn the front grille clockwise until the Front Grille Alignment Mark aligns the Rear Grille Right Alignment Mark. Make sure the grilles are securely fastened. Turn on/off Rear Grille Right Alignment Mark Turn on Rear Grille Lef Alignment Mark Front Grille Alignment Mark Front Grille Alignment Mark Press the buton to start the fan.
When turned on for the first time, the default speed is slow (1). Top View before Fastening the Front & Rear Grille Top View afer Fastening the Front & Rear Grille When the fan is working, press and hold the buton to stop it. Turn off Switching Speed/Mode 13 11 Switching speed Press the buton to adjust the speed. With each press, the corresponding status indicator will be on (see the table below). The fan will remember and apply the last used speed mode when turned on again. Step 6: Fasten the front grille Insert fan grille screw into the hole at the botom of the fan grille. Turn the screw clockwise by using the included 7 7 Allen key to tighten it. 9 9 Note:
means the indicator is on; means the indicator is off. 6 F a S d n taIn ic S p tu e sa to e r d S lo w (1) M e d iu m (2 ) F a s t (3 )