HOME 2.28 DISC RIM RUNOUT GENERAL RADIAL RUNOUT Disc wheels should be checked for lateral and radial runout before installing a new tire or tube. See Figure 2-91 . Spin wheel to check for radial runout. Replace wheel if rim radial runout exceeds 0.76 mm (0.030 in.). Figure 2-90. Checking Cast Wheel Lateral Runout 2-74 2009 VRSC Service: Chassis Table 2-11. Rim Runout Maximums RUNOUT MM IN Lateral 0.76 0.030 Radial 0.76 0.030 LATERAL RUNOUT PART NUMBER TOOL NAME HD-95599-80 WHEEL TRUING STAND See Figure 2-90. Install arbor in wheel hub and place wheel in WHEEL TRUING STAND (Part No. HD-95599-80). To check rim lateral runout, place a gauge rod or dial indicator near rim bead. Spin wheel.
If lateral runout exceeds 0.76 mm (0.030 in.), replace wheel. sm03115 1 2 3 1. Wheel truing and balancing stand 2. Lateral runout 3. Gauge rod sm03117 Figure 2-91. Rim Radial Runout RUNOUT MM Lateral 0.76 Radial 0.76