HOME 2.31 FRONT FENDER REMOVAL 2. Remove fasteners (1, 2) that hold bracket to fender and separate bracket and fender. NOTE Be careful lifting fenders out of forks or you may scratch the paint. If necessary, cover fender with a clean shop rag to pre- vent damage. INSTALLATION Apply LOCTITE 262 to threads of fender fasteners before installation. NOTE 1. See Figure 2-99 . Remove fasteners (3) from front fork and remove fender and bracket. 1. See Figure 2-99 . Attach fender to fender bracket. Tighten 2-80 2009 VRSC Service: Chassis fasteners (1, 2) to 4.1-6.8 Nm (36-60 in-lbs). sm03128 1 2. Position fender and bracket in front fork and se fasteners (3). Tighten to 20-26 Nm (15-19 ft-lbs 3 2 1.
Bracket to fender fasteners 2. Nuts 3. Bracket to fork fasteners Figure 2-99. Front Fender (typical) 1. Bracket to fender fasteners 2. Nuts 3. Bracket to fork fasteners Figure 2-99. Front Fender (typical)