HOME 3.7 STRIPPING MOTORCYCLE FOR SERVICE GENERAL NOTE sm04535a 4 If cylinder head, crankcase, or transmission work needs to be performed, engine must be removed from chassis. 1. If engine is to be removed, position motorcycle on a lift 1 with side extensions. 2. See Figure 3-7. Remove right side cover. 1 3. Remove maxi-fuse. 4. Remove the engine. See 2.7 ENGINE REPLACEMENT. 2 To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a) 5 When servicing the fuel system, do not smoke or allow 1 open flame or sparks in the vicinity.
Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00330a) 2 3 1. Fastener 2. Side cover 3. Maxi-Fuse (40 amp) 4. VRSCF models 5. Models except VRSCF Figure 3-7. Maxi-Fuse 3-16 2009 VRSC Service: Engine 4. VRSCF models 5. Models except VRSCF Figure 3-7. Maxi Engine -Fuse