HOME sm01036 DISASSEMBLY TOOL NAME PART NUMBER VALVE SPRING COMPRESSOR HD-34736-B VALVE GUIDE CLEANING BRUSH HD-34751 6 MM PILOT HD-35758-51 CYLINDER HEAD SUPPORT STAND HD-39782 CYLINDER SUPPORT ADAPTER HD-39782-13 CYLINDER SUPPORT ADAPTER HD-39782-14 VALVE GUIDE REAMER HD-45319 VALVE GUIDE REMOVER/INSTALLER HD-45320 VALVE GUIDE FLEX HONE HD-45321 SNAP-ON VALVE STEM SEAL PLIERS YA8230 1. See Figure 3-63 . Clean oil film from tappets and use marker to number tappets according to the cast in number at each valve. Remove tappets and shims and keep together for assembly in same position. Figure 3-61. Cylinder Head Holder 4. See Figure 3-62 .
Use CAM CHAIN TENSIONER GUIDE PIN REMOVER/INSTALLER (Part No. HD-45312) to Figure 3-63. Number Tappets To continue engine disassembly, go to STEP 6 of 3.10 UPPER AND LOWER CRANKCASE SEPARATION . NOTE 2. See Figure 3-64 . Install VALVE SPRING COM- PRESSOR (Part No. HD-34736-B). Remove valves, springs and keepers. Keep removed parts organized so they will be assembled in same position. 2009 VRSC Service: Engine 3-35 remove cam chain tensioner pins. sm01037 Figure 3-62. Cam Chain Tensioner Guide Pins sm01039