HOME 1.4 BULB REQUIREMENTS GENERAL NOTES Refer to Table 1-6 . This table gives the location and bulb requirements for Harley-Davidson VRSC motorcycles. • All VRSC speedometers, tachometers indicator lamps and odometers are illuminated with LEDs. • LEDs are non-repairable. The entire instrument cluster must be replaced if an LED fails. 1-10 2009 VRSC Service: Maintenance Table 1-6. Bulb Chart:
2009 VRSC Models LAMP DESCRIPTION (ALL LAMPS 12 VOLT) BULBS REQUIRED CURRENT DRAW (AMPERAGE) H-D PART NUMBER Headlamp VRSCAW, VRSCF low beam 1 4.30 68881-01 high beam 1 5.10 67717-01 Headlamp VRSCDX low beam/high beam 1 4.58/5.00 68329-03 Position lamp international position lamp 1 0.36 53436-97 Tail and stop lamp VRSCAW, VRSCDX tail/stop lamp 1 0.59/2.25 68168-89A license plate illumination 2 0.33 68193-95 tail/stop lamp international 1 0.42/1.75 68169-90A license plate illumination inter- national 2 0.37 53436-97 Tail and stop lamp VRSCF Illuminated with LEDs. Replace entire assembly upon failure. License plate illumination VRSCF Illum inated with LEDs.
Replace entire assembly upon failu re. Turn signal lamp VRSCAW, VRSCDX front /running 2 2.25/0.59 68168-89 rear 2 2.25 68572-64B front/running international 1.75 68163-84 2 rear international 2 1.75 68163-84 Turn signal lamp VRSCF front/running Illuminated with LEDs. Replace entire assembly upon failure. rear Illuminated with LEDs. Replace entire assembly upon failure. Instrument cluster Illuminated with LEDs. Replace entire assembly upon failure.