HOME 1.6 RADIATOR SIDE COVERS REMOVAL 3. See Figure 1-11 . Radiator side cover is held in place by a bottom mounting pin (1), top mounting pin (2) and latching tab (3). Remove radiator side covers as follows: NOTE The radiator side covers are delicate and should not be forced into or from mounted position. Use care during removal and installation to avoid damage. a. See Figure 1-12 . Grasp bottom of radiator side cover and pull down gently to disengage bottom mounting pin from bottom mounting hole located in radiator front cover. 1. Remove main fuse. b. See Figure 1-13 .While supporting radiator side cover, sm01699 2 1 1. Lower radiator side cover fastener 2.
Radiator side cover grasp top of side cover and pull up gently to disen- gage top mounting pin from mounting hole in front cover. c. Slide radiator side cover down gently to disengage latching tab from mounting lip in radiator front cover. d. Set radiator side cover aside. sm01701 Figure 1-10. Lower Radiator Side Cover Fastener (typical) Figure 1-12. Bottom Mounting Hole (mid mount control right side shown) 2. See Figure 1-10. Remove lower radiator side cover fastener. sm01702 sm01700 3 2 1 Figure 1-13.Top Mounting Hole 1. Bottom mounting pin 2. Top mounting pin 3. Latching tab sm01703 Figure 1-11.
Radiator Side Cover (typical) (inside view) Figure 1-14.Tab Mounting Lip 1-14 2009 VRSC Service: Maintenance Figure 1-14.Tab Mo e: Maintenance unting Lip