Fitting the extractor hood To a wall-hanging cupboard 50 cm wide extractor hood: With 4 screws. 90 cm wide extractor hood: With 6 screws. 30 163 163 560 898 1. Dimensions for the mounting boreholes can be found in, or place a template on the base of the wall- hanging cupboard. 2. Mark the mounting holes and make pilot holes with a bradawl. In exhaust-air mode (upwards) mark the exhaust-air opening and saw out. ❑ Consider the location of the connection cable; if required, saw out the cupboard. 3. Remove the filter grille (see Instructions for use). 4. Screw the extractor hood to the base of the cupboard. 60 cm wide extractor hood: With 4 screws. 163 27