No.20S024-02 HR10A-7R-6PB (Hirose) or equivalent. This connector is for input and output signals. The trigger input and sync input /output signals can be assigned through camera setting communication. As for the cable part (Female connector), HR10A-7P-6S (Hirose) or equivalent can be used. Pin assignment Output signal selection for Line0 to Line3 The output signal can be select through GenICam Command. STC-MBS212CXP6 / STC-MCS212CXP6 Product Specifications and User’s Guide 15/50 Pin No.
Signal Name IN/OUT Signal Voltage 1 GND - 0 V 2 Line3 IN/OUT +3.3 V 3 Line2 IN/OUT +3.3 V 4 Line1 IN/OUT +3.3 V 5 Line0 IN/OUT +3.3 V 6 - - - GenICam command Off User Output Trigger Out Trigger Through Out Exposure End Out Frame End Out Frame Trigger Wait Transfer End Out Sensor Read Out Strobe Out Exposure Active