No.20S025-02 8.9 White Balance (Only available for color model) The color compensates by gain adjustment for each individual color. The gain for each color has to adjust to same brightness with flat white target. The white balance control methods are listed in below: ・ Disable ・ Manual (Off) ・ Auto White Balance (Continuous) ・ Push to set white balance (Once) GenICam Parameters Disabled white balance gain and each color gain set as x1. Setting Procedure 1. Sets “Disable” at “BalanceWhiteAuto” The optimized BalanceRatio (Red, Green or Blue) for white balance. Setting Procedure 1. Sets “Red” (when Red gain set) at “BalanceWhiteSelector” 2. Sets value at “BalanceRatio” 3.
Sets “Green” at “BalanceWhiteSelector” 4. Sets value at “BalanceRatio” 5. Sets “Blue” (when Blue gain set) at “BalanceWhiteSelector” 6. Sets value at “BalanceRatio” 7. Sets “Off” at “BalanceWhit Auto” Optimizes white balance gain each frame automatically. Setting Procedure 1. Sets “Continuous” at “BalanceWhiteAuto” STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 29/49 BalanceWhiteAuto IEnumeration Type White balance control method selection. Default: Off (Manual) BalanceRatioSelector IEnumeration Type White balance control target color selection. BalanceRatio IFloat Type Color gain setting for selected color selects at “BalanceRatioSelector”. Range: 0 to 511