No.20S025-02 8.10 Binning (Only available for monochrome model) Binning is summing and averaging beside pixels into one pixel. The pixel data inside of red square add or average as one pixel. Binning X (OFF: 1), Y (OFF: 1) Binning X (ON: 2), Y (ON: 2) GenICam Parameters * Note.1: It is necessary to set setting for “BinningHorizontal” and “BinningVertical”. * Note.2: It is necessary to set less than “1 frame period time” exposure time to increase frame rate. * Note.3: Binning and Decimation function cannot be use simultaneously. 。 STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 31/49 BinningHorizontalMode IEnumeration Type Sets Binning mode on horizontal direction Sum:
Summing mode (Default) Average: Average mode BinningHorizontal IInteger Type Sets Binning on horizontal direction 1: Disable Binning 2: Binning 2 Pixel Default: 1 BinningVerticalMode IEnumeration Type Sets Binning mode on vertical direction Sum: Summing mode (Default) * Does not support Average for vertical direction BinningVertical IInteger Type Sets Binning on vertical direction 1: Disable Binning 2: Binning 2 Pixel Default: 1