No.20S025-02 9.2 Output Port Function This function sets the Output to Line Mode, and then Line is assigned as output. The following functions can be assigned when IO port is used as output signal port. The following list shows the configurable functions available through LineSource. The function that describes as “Enable” on “Changeable Polarity” is configurable polarity on Line Inverter (true, false). 1) Off (Disable) Disable the output signal. 2) User Output (General Output) High or Low level signal that sets on software is output.
3) Trigger Out (Trigger Output) The trigger signal that added “Trigger Out Delay (Output pulse delay time)” and “Trigger Out On Time (Output pulse width)” is output. 4) Trigger Through Out (Trigger Output) The trigger signal that added “Trigger Out Delay (Output pulse delay time)” and “Trigger Out On Time (Output pulse width)” is output. 5) Exposure End Out (Exposure End) “Trigger Out on Time (Output pulse width)” activation time signal with set “Trigger Out Delay (Output pulse delay time)” is output when expose was finished.
6) Frame End Out (Sensor Readout End) “Trigger Out on Time (Output pulse width)” activation time signal with set “Trigger Out Delay (Output pulse delay time)” is output when sensor read out was finished. 7) Frame Trigger Wait (Trigger wait Output) “Frame Trigger Wait” signal to determine whether camera can be receiving and process trigger signal or not. STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 40/49 No. Function Name 1) Off (Default) 2) User Output 3) Trigger Out 4) Trigger Through Out 5) Exposure End Out 6) Frame End Out 7) Frame Trigger Wait 8) Transfer End Out 9) Sensor Read Out 10) Strobe Out 11) Exposure Active