No.20S025-02 [Usage instruction] STC-MBS510CXP6 / STC-MCS510CXP6 Product Specifications and User’s Guide 6/49 Caution Do not grounding DC power (+) of all devices that are connect to the camera. The camera housing is connecting to 0 V line of camera inside circuit. There is a risk of short circuit between camera inside ciurcuit and frame ground. This will cause of malfunction. It is necessary to wiring and mounting that is specified in the specifications for this camera. This will cause of fire or malfunction. It is necessary to wiring with turn off the camera. This will cause of electrification or malfunction. It is necessary to mounting the camera without stress for the cable.
This will case of electrification or fire. Do not use CoaXPress un-supported cable and board. There is a risk of malfunction if the camera connects with wrong environment and turn on the camera. Warning Do not touch the terminal and PCB board While turn on the camera. This will cause of electrification or accident caused by malfunction. Do not put combustibles near the camera. This will cause of fire. Do not use without usage that is specified in the specifications for this camera. This will cause of personal injury or malfunction. Do not push metals including screw driver into radiation holes. This will cause of electrification or malfunction.
Do not touch the camera housing while or afterusing the camera. There is a risk of get burned. Caution Do not push contamination into opening of the camera. This will cause of electrification or malfunction. Do not block the radiation holes. This will cause of fire due to increase the camera inside temperature.