Direction Knob Turn or tighten screws: Turn the alignment mark to the R, then press and hold the start buton. Neutral: Turn the alignment mark to the dot position. Loosen or remove screws: Turn the alignment mark to the L, then press and hold the start buton. Start Buton Start the screwdriver: Press and hold the start buton, and the LED light will turn on. Stop the screwdriver: Release the start buton, and the LED light will turn off. Charging Charging: The charging indicator is red. Fully Charged: The charging indicator is white. This screwdriver is equipped with a USB-C charging port, and a USB charging cable is included. 03 General Power Tool Safety Warnings Warning!
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or batery-operated (cordless) power tool. Work Area Safety Keep work area clean and well lit. Clutered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2