Brought to you by BirfMark − INTRODUCTION FOR ALL OF VEHICLES IN−13 (f) AIRBAG SENSOR ASSEMBLY The connectors to the airbag sensor assembly should be connected or disconnected with the sensor mounted on the floor. If the connectors are connected or disconnected while the airbag sensor assembly is not mounted to the floor, it could cause undesired ignition of the supplemen- tal restraint system. (g) WIRE HARNESS AND CONNECTOR The SRS wire harness is integrated with the cowl wire har- ness assembly and floor wire harness assembly. The wires for the SRS wire harness are encased in a yellow corrugated tube. All the connectors for the system are also a standard yellow color.
If the SRS wire harness be- comes disconnected or the connector becomes broken due to an accident, etc., repair or replace it as shown on page RS−37 . 1996 LAND CRUISER (RM451U) 13 Author : Date: Brought to you by BirfMark Version 1.11 - 03/16/2010