Installation Placing the charging dock against a wall and connecting it to an electrical outlet Charging When using the vacuum-mop for the first time, manually place it against the charging dock to charge. Ensure that the charging contacts on both the vacuum-mop and the charging dock are aligned. During daily use, you can directly press the buton to send the vacuum-mop to the charging dock to charge. > 0.5 meters > 1.5 meters > 0.5 meters Notes: • Do not place the charging dock in an area with direct sunlight. • Make sure there are more than 1.5 meters of clearance in front of the charging dock and more than 0.5 meters on either side of it.
• Tidy up any loose power cord to prevent the vacuum-mop from geting tangled, which could accidentally move or unplug the charging dock. Notes: • If the vacuum-mop cannot be turned on due to a low batery, put it against the charging dock to charge. • The vacuum-mop will automatically turn on when it is on the charging dock, and cannot be turned off while charging. • When using the vacuum-mop for the first time, please follow the in-app prompts to complete quick map creation. To ensure accurate mapping, it is recommended to follow the vacuum-mop and remove any obstacles on the ground when it is creating the map. Make sure the vacuum-mop starts from the charging dock.
• If the vacuum-mop may get stuck or scratch the surface of the furniture in some areas, you can set restricted areas in the app to prevent the vacuum-mop from entering those areas. Removing the protective strips Before using the vacuum-mop, remove the protective strips from each side. 08