TRANSFER CASE - TOD 5D2-33 4WD LOW INDICATOR BLINK STEADILY Circuit Description When the 4H/4L switch turned from 4H (4L) to 4L (4H) electric shift starts and 4WD LOW indicator begin to blink until the shifting is completed or canceled. If 4H to 4L shifting is completed the 4WD LOW indicator will illuminated and 4L to 4H shifting is completed it will be turned off. If shifting fails the 4WD LOW indicator will blink steadily until the shifting is completed or canceled. Diagnostic Aids The 4WD LOW indicator shows that the transfer case is operating in low range. And the indicator will blink while shifting from low to high range or high to low range.
If the indicator blinks steadily it warns the shifting command and real position of the shift motor or position encoder are not matched. SSANGYONG Y200 Step Action Value Yes No 1 1. Stop the vehicle. 2. Turn the 4H/4L switch to original position. Does the 4WD LOW indicator stop blinking? - Go to Step 2 Go to Step 3 2 1. Make sure the vehicle stopped completely. 2. Set the shift lever to N (neutral) and wait more than 2 seconds. 3. Turn the 4H/4L switch. Does the 4WD LOW indicator blink and stop after complete shifting? • 4H —> 4L: 4WD LOW indicator illuminates. • 4L —> 4H: 4WD LOW Indicator turns off. - System OK Go to Step 3 3 1. Starts TOD Diagnostic System Check. 2.
If there were no trouble code, replace TOD. Is the repair complete? - System OK -